Plastic sheet,
rod and tube.
Cut to your dimensions in Fort Collins. Adhesives, tools and other supplies at the counter. Need something that is not on the list? Call and ask. We can usually get it.
Start with the job.
You don’t need to know the plastic yet. Choose what you’re making for a starting point.
-
A clear panel
Acrylic is a starting point for clear displays and panels. Ask about polycarbonate when impact resistance matters.
Quote a panel -
A display or box
Acrylic can be cut and bonded into a clear display or box. See custom display cases.
Quote a display -
A replacement part
Acetal is worth discussing for a machined part. UHMW is another starting point for wear strips and sliding surfaces.
Quote a part -
A sign or display panel
Expanded PVC and aluminum composite sheet are used for signs and displays.
Quote a sign -
A repair
The material and the job determine whether to discuss an adhesive, a resin or fiberglass supplies.
Quote a repair
Plastics and Acrylics
Choose a material to start a quote. We will confirm available thicknesses and cut sizes with you. We save usable scraps and offcuts for another project instead of a landfill. For smaller jobs, ask about the remnant bins.
What to bring for a cut-to-size orderAcrylic, clear
Point at a material to see its sample.
- ABS
- Abrasion resistant polycarbonate
- Acetal plate
- ACM (aluminum composite)
- Acrylic
- Colored acrylic
- Coroplast
- DP/P95
- Expanded PVC
- HDPE, high density polyethylene
- LDPE, low density polyethylene
- Mirror
- Multiwall polycarbonate
- Non-glare acrylic
- Nylon
- Polycarbonate
- PETG
- Phenolic
- PVC, polyvinyl chloride
- Styrene
- UHMW
Rod, Tube and Channel
Round and square profiles, plus the channel and hinge stock that goes with them.
- Acetal rod
- Acrylic rod, round and square
- Acrylic tube
- Polycarbonate tube
- J channel
- L channel
- U channel
- Z channel
- Triangle
- Right triangle
- Superhinge
- Flat living hinge
- Flex fold
Acrylic Accessories and Tools
The tooling that makes plastic behave, for the jobs you would rather finish yourself.
- Acrylic cubes
- Acrylic Paint Stixs
- Drill bits
- Saber saw blades
- Arbor adapter
- Buffing kit
- Edge scraper
- Microfiber cloth
- Plastic cutter
- Plastrip heater
- Sandpaper
Adhesives
Weld-On solvent cements and applicators. Ask at the counter which one suits your joint.
Cleaners and Polishes
For scratch removal, final finish, and keeping acrylic clear once it leaves here.
Resins
West System and Alumilite, stocked deep. Grouped here by what the part number does.
- Epoxy resin 105A, 105B
- G/flex epoxy
- Hardeners, fast 205A, 205B
- Hardeners, slow 206A, 206B
- Special clear hardener 207 SA, 207 SB
- Extra slow hardener 209 SA, 209 SB
- Fillers 403, 404, 405, 406, 407, 410
- Mini pump sets for resins and hardeners
- Static mixer
- G/5 adhesives
- Boat repair kits, aluminum and plastic
- Measuring cups and stir sticks
- Handguards and texture gloves
Fiberglass Supplies
Cloth, mat and the consumables that go with a layup. Call for current weights and widths.
Nothing in the list matches that. Call (970) 225-3835 and ask, we can usually get it.
Ordering cut-to-size plastic in Fort Collins
For a clear panel, a replacement piece or another cut-to-size project, start with the job the plastic needs to do. You do not need to know the material before contacting the counter.
“Great customer service, great products, super quick turnaround, and reasonably priced.”
Bring what you know
- Finished dimensions, with units and any openings or fit requirements.
- The number of pieces you need.
- What the piece will do and how it will be supported.
- The material and thickness you have in mind, if known.
A sketch, photo or sample can help explain the fit. The shop will confirm the material, available stock and pricing for your request before cutting.
A starting point for clear plastic
If you know the material as plexiglass, ask about acrylic. Acrylic is a starting point for clear displays and panels. Ask about polycarbonate when impact resistance matters. Tell us how the piece will be used so the shop can discuss the material and thickness with you.
A case, cover or shaped part may need fabrication as well as stock. Explore custom display cases and covers or acrylic laser cutting and engraving, then share what the finished piece needs to do.
Not sure which material?
Describe what the part has to do and we will tell you what it should be made of.